plus91RES – Page 3 – Rescare Medisys (India) Pvt. Ltd.

VIVO 40

May 6, 2016 plus91RES Leave a comment

New Vivo 40 with Target Volume

The Vivo 40 is a flexible, advanced and clinically safe respiratory solution that enables patients to safely make the transition from hospital to home.The Vivo 40 provides both invasive and non-invasive respiratory support in PSV, PCV and CPAP mode. Thanks to the new added Target Volume feature the delivered inspiratory pressure will automatically be adjusted to ensure a stable tidal volume delivery to the patient. Target Volume combines the comfort and technical advantages of pressure-limited ventilation with the safety and ease of use of volume ventilation. Target Volume will optimize the delivered tidal volume, adapt to the patients lung mechanics and reduce the need for ventilator adjustments. Thanks to eSync – our highly responsive Trigger technology – the Vivo 40 synchronizes smoothly with the patient’s breathing effort. As the patient demands for a new breath the Vivo 40 responds immediately and delivers the exact pressure required. Enhanced pressure support mode gives clinical flexibility when needed and a maximum pressure of 40 cm H2O offers the ability to treat difficult restrictive conditions. Also, when the needs of treating small patients arise, the Paediatric mode offers an extra margin of clinical safety. An integrated heated humidifier may be included, and the internal battery assures battery operation beyond the external DC supply. The appealing design together with the intuitive user-interface makes the Vivo 40 an integrated part of any hospital or home environment.

VIVO 30

May 6, 2016 plus91RES Leave a comment

The Vivo 30 is an advanced and clinically safe respiratory solution, which enables patients to be treated at home.The Vivo 30 provides non-invasive respiratory support through Pressure Control and Pressure Support modes. Thanks to eSync – our highly responsive Trigger technology – the Vivo 30 synchronizes smoothly with the patient’s breathing effort. As the patient demands for a new breath the Vivo 30 responds immediately and delivers the exact pressure required. Its intuitive user-interface with home and clinical modes allows both the patient and clinician to adjust the desired settings easily and safely. An optional integrated heated humidifier comfortably humidifies the patient air.
The attractive appealing design together with the logical user interface makes the Vivo 30 an integrated part of any home environment. The Vivo 30 allows the patient to live a life as rich as possible, at “home”.

POLARIS 100/200

May 6, 2016January 18, 2018 plus91RES Leave a comment

Polaris® 100/200 Medical Lights and Video

In the operating room, the right illumination is essential for success.The Polaris® 100/200 surgical illumination systems provide cool light with natural colours and rich-contrast for thousands of hours of carefree operation without straining on your hospital‘s budget.

LED technology in the OR

LEDs are highly efficient light sources for surgical applications. Dräger has now combined the advantages of this innovative light source with a new, extremely compact, lightweight yet robust design that includes individual lens reflectors for enhanced output and shadow control. Even the little heat produced by the LEDs is regulated and dissipated by an integrated Thermal Management System. The maximum light head temperature (upper surface) will not exceed 35 °C*. With an average operational lifetime of 50,000 hours, this LED technology is as reliable as affordable. * At a room temperature of 20 °C.

The Polaris 100

The all new, highly compact Polaris 100 features 48 LEDs with an output range of 40,000 to 120,000 lux. A special mode provides ambient light from a single LED to support minimal invasive procedures. The sleek yet very sturdy light head weights just 13 kg and makes positioning exremely easy and comfortable. Withoutany moving parts in the light head this system requires almost no maintenance. With a color temperature of 5,600 K, which corresponds to natural sunlight at noon, this OR light achieves a color rendering index of Ra 95 nd a color rendition index of R9 93, which ensure rich contrast and natural color image without compromising the red tones.

The Polaris 200

Without changing the external dimensions or design, the Polaris 200 gives you additional 18 LEDs for a total of 66. This translates to a maximum output of 160,000 lux. The light intesity can be easily dimmed down to 40,000 lux. Color temperature and rendering index are identical to those of the Polaris 100. Each LED is equipped with its own lens reflector system. The homogenous light column of both lights provides the surgeon with a shadow-controlled, contour-rich, natural color view of the surgical field.

Compact design, simple operation

The classic round design includes integrated handles for nonsterile personnel and touch panel controls for easy handling and operation. Sterile personnel can position the Polaris 100/200 easily with the central sterile handle. Each of the four clearly marked control buttons performs a single function, and an optional, wall- ounted control panel is also available. The smooth, seamless casing makes cleaning quick and simple, while its lightweight construction ensures practically effortless positioning.

Easy installation and maintenance

The straightforward design philosophy of the Polaris 100/200 makes installation and maintenance very easy.The light heads are controlled by the proven Powerline Communication (PLC) system.

PRIMUS

May 6, 2016January 18, 2018 plus91RES Leave a comment

An entire world of care

You’re playing a vital role in an increasingly complex healthcare system. Your job is to provide state-of-the-art care every step of the way, and to do it in the most cost-effective way possible. So why settle for a solution that wasn’t built around your needs and the needs of your patients? In today’s highly integrated hospital environment, anaesthetists ften find themselves at the very core of a highly complex process. Faced with factors such as new and demanding procedures and techniques, increased patient throughput, spiraling costs and even personnel shortages, efficiency has become one of the most important goals for any modern healthcare institution. But being efficient requires an tima- te knowledge of the processes involved – and finding ele- ant solutions that precisely address those problems. At Dräger, it’s something we’ve been doing for over a centu- y. After listening medical professionals around the world,we decided to create an anesthesia workstation that was designed to be nothing less than your personal anesthesia assistant.

Introducing the Dräger Primus®

SUPPORT The Dräger Primus combines time-tested design with state- of-the-art technology to answer the demand for an innovative, comprehensive anesthesia solution for today’s increasingly complex medical environments. Its ergonomic design provides reliable workflow support in practically every phase of the OR process. CARE The advanced, ICU-quality ventilation and monitoring capabilities offered by the Primus workstation make it perfectly suited for adults, children and neonates of any acuity level. SIMPLICITY The Primus features the familiar user interface concept common to all current Dräger medical devices. Its clear, intuitive structure supports a rapid familiarization process, making it easier for your staff to learn to operate. EFFICIENCY Preparation, documentation, pre- and postoperative routines and maintenance are essential components of the OR process. Its fully automated self check feature is just one example of this kind of process support. Because the Primus incorporates an electrically driven piston ventilator, it requires no drive gas. With the Primus, you’ll quickly discover and utilize efficiency reserves in your perioperative workflow that will help you create a cost-effective working environment.

FABIUS PLUS

May 6, 2016January 18, 2018 plus91RES Leave a comment

Take a closer look at the Dräger Fabius® plus

Hospitals around the world are constantly searching for practical, economical solutions to their everyday challenges. With more than 30,000 Fabius family members currently in use in more than 120 countries around the world, it’s clear that for many hospitals the search for quality and reliability often ends with the Fabius plus. Innovative ventilation technology paired with easy operation and maintenance make the Fabius plus a natural choice for many applications. The Fabius plus combines uncompromising flexibility and enhanced connectivity features that set it apart from so many other platforms. It gives you what you need now and still leaves room for you to grow in the future thanks to a ide range of options that let you expand your capabilities when-ever you need to. The Fabius plus is a sound investment.

PERFORMANCE FEATURES – Supports all major ventilation modes – High-contrast monitor with color option – Wide-base trolley with extra stability for flexible monitor combinations – Optional wall or ceiling versions – Solid, spacious design with large drawers (trolley version only) – Intelligent backup functions help maximize OR uptime – Standardized Dräger user interface for easy and intuitive operation – Industry standard rails for additional Dräger and third-party equipment – CLIC absorber compatible HIGH-PERFORMANCE VENTILATION

At its core, the Fabius plus features our powerful and accurate E-vent piston ventilator, which requires no drive gas and delivers ICU-like ventilation performance. This means the Fabius plus can handle a wide range of venti- ation applications and acuity levels in pediatric and adult patients. All major ventilation modes are supported, including volume control, pressure control, pressure support (PS), and SIMV/PS. But it doesn’t stop there. The Fabius plus comes complete with advanced features such as fresh gas decoupling, which maintains constant tidal volumes regard- ess of fresh gas flow. Dynamic compliance compensation and backup ventilation for PS modes let you ventilate with greater confidence and control. The Fabius plus can be equipped with two vaporizers for volatile anesthetic agents. The combination of its high-precision ventilator and its leak-tight breathing system design makes the Fabius plus well suited for low-flow ventilation. emergency situations, the quick-start feature allows manual ventilation when the device is off, on, or in standby mode for rapid support. Even in the event of a gas supply failure, automatic ventilation can be temporarily continued.

COMPREHENSIVE CONTROL

The Fabius plus features an integrated, high-contrast 6.5-inch monitor which displays all relevant ventilation parameters and a pressure curve. A color option is also avail able. Gas flow rates are monitored via conventional glass flow tubes. If you’ve used a Dräger workstation before, then you’re already familiar with Dräger’s standard user interface which features our established select-adjust-confirm concept. This means you’ll be up and running on the Fabius plus in just a short time.

ENHANCED ERGONOMICS AND ECONOMICS

The Fabius plus was designed to suit your work flow, not vice versa. The stable, wide-base trolley makes positioning the Fabius plus both safe and simple. If you prefer, a wall- or a ceiling-mounted version is available. In the trolley version, three large drawers provide ample storage space for additional equipment and consumables, and a large table facilitates comfortable documentation. The design of the external compact breathing system

EVITA V 300

May 6, 2016January 18, 2018 plus91RES Leave a comment

Sustainable decisions require multiple options

The daily demands in the ICU are steadily increasing: Increasing number of critically ill patients, longer life expectancy, more space is required at the bedside, more patient transports, rapid technical and medical advances…

Flexible equipment is required that is able to meet and master the changing conditions and challenges of your everyday hospital work. The welfare of the patient and the shortest possible length of stay in the ICU are of course always in the foreground. An individually scalable ventilator that is able to respond flexibly to both your current needs as well as future requirements is the right solution.

THE EVITA STANDARD

The Dräger Evita V300 cannot make your daily decisions for you – but it can help to facilitate them. With their high quality standards, Evita devices have supported you for over 25 years and the experience of more than 80,000 devices was incorporated into the dvelopment of the new generation.

VERSATILE AND SCALABLE – Ventilation for adults, children and neonates: invasive, non-invasive and with O2-therapy – Volume- or pressure-controlled ventilation, spontaneous breathing – Independence due to optional gas and power supply units: GS500 (compressed air),PS500 (power), TSU (gas) – Flexible workstation integration by attaching to supply unit or trolley – Individually adjustable configurations easily transferred via USB – Context-sensitive help function facilitates setting the ventilation parameters and explains device functions HIGH VENTILATION QUALITY – Automatic tube compensation (ATC) compensates for artificial airway resistance – Automatic leak compensation with invasive and non-invasive ventilation – AutoFlow® in volume-controlled ventilation provides the tidal volume at the lowest possible pressure – PC-APRV with optional AutoRelease enables spontaneous breathing with continuous positive airway pressure and short-term pressure relief – Breathing deeply and freely thanks to AutoFlow®, Volume Guarantee (VG) or SPN-CPAP – Various spontaneous breathing support, e.g.: VC-MMV, SPN-PPS, Volume Support (VS), Pressure Support (PS) – Advanced analysis tools such as trends or CO2 monitoring – Automatic weaning with SmartCare®/PS – Graphical representation of breathing resistance and elasticity with Smart Pulmonary View The scope of functions offered by the Evita V300 is individually scalable with optional hardware and software components.

OXYLOG 1000

May 6, 2016 plus91RES Leave a comment

Oxylog® 1000 Simply ventilate

The Oxylog® has been the natural choice of emergency care ventilator for more than 25 years. The Oxylog® 1000 is the most compact ventilator in the Oxylog® range.

This device combines the renowned Dräger technology of the Oxylog with the higher demands which are placed on n emergency ventilator today. With its simple and user-friendly operation, the Oxylog 1000 sets standards. he Oxylog 1000 is lightweight and sturdy, making it ideal for mobile use. It offers you all that you need for prehospital emergency ventilation, as well as in-hospital emergency esuscitation.
The Oxylog 1000 also stands for great reliability, thanks to its fundamentaldesign, making it ready to meet rough conditions during your mission. All that the Oxylog 1000 needs to venti- ate your patients is oxygen, giving you the freedom to work wherever you need to.

Easier for you, safer for your patient

– All we need is oxygen – and so does he Oxylog 1000. It functions on the basis of a purely pneumatic system, releasing you from being dependent on additional power-supply or batteries.

– Safety first: Integrated audible and visual alarms alert you to disconnection, stenosis and low supply pressure.
– You care about the well-being of your patient. Delicate lung tissue may be damaged at high pressure levels. The Oxylog 1000 allows limitation of airway pressure through its Pmax. Once the pressure limit is reached, pressure-limited ventilationw with variable volume continues during inspiration.

– In emergency situations, every second counts. Quick handling is required. Familiar control elements laid out in a clear and logical design support optimal and easy operation. The Oxylog‘s user interface may be adjusted according to local customs and definitions.
– An integrated CPR mode allows ventilation, even during resuscitation efforts.

– The extensive DrägerService® network- provides support to you world-wide.

JM -105

May 6, 2016 plus91RES Leave a comment

Gentle for the newborn, efficient for you.

error and time consumption. Until now. D-7346-2009 While neonatal jaundice – or hyperbilirubinemia – occurs in almost all babies, it is a cause of concern for care-givers and anxiety for families. If not treated in time, neonatal jaundice can lead to permanent brain damage1 Screening for jaundice by visual assessment can lead to an overestimation of risk, which means unnecessarylab tests. This blood draw (total serum bilirubin testing (TsB)) requires a heel prick, which is painful for the baby and costly for the hospital. Visual assessment can also lead to an underestimation of risk, which could result in a failure to obtain necessary lab tests. That’s why transcutaneous bilirubin testing (TcB) has grown rapidly in the past few years as a standard practice in hospitals to identify at-risk infants. But even TcB has presented challenges in terms of human.

NEXT-GENERATION JAUNDICE SCREENING FROM DRÄGER

Building on more than 30 years of proven technology 2 he Dräger Jaundice Meter JM-105 is a non-invasive transcutaneous bilirubinometer that measures the yellow- ess of subcutaneous tissue in newborn infants as young as 24 weeks gestational age3 a transfusion or phototherapy. It provides a visual digital measurement that correlates with serum bilirubin results. Effective on heterogeneous populations, the JM-105 can be used in both hospitals and outpatient settings. The JM-105 improves the process of jaundice screening in several ways. The risk of infection is reduced since screening with the JM-105 is non-invasive and drawing blood is not necessary. The device also reduces risk of human
error because it can scan nurse and baby ID information with an optional bar code scanner and can automatically measure, save and transfer data. Not only does this eliminate manual transcription – which can be error prone and time consuming – but it also results in quicker access to information for decision making. , ho have not undergone Readmission Rate for Hyperbilirubinemia. Clinical Chemistry 2005;51 D-94479-2013 Screening with the JM-105 is cost effective because it reduces the frequency of lab tests. And because the device has a reusable probe, expensive disposables are not needed.
Because bilirubin levels peak two to four days after birth – when most babies have gone home – jaundiced babies have to be readmitted for treatment. Since the JM-105 can detect this risk before babies leave the hospital, jaundice can be treated immediately, which can reduce readmissions and lengths of stay 4 .